Elecraft

0.1" right angle header and sockets

Classic

List

Threaded

6 messages Options

Kevin Rock

0.1" right angle header and sockets

I have been searching through Mouser and other catalogs for something I know exists. I have seen examples in both Elecraft kits and in other kits I have built. Now I want to find these parts for a project I am designing. I want a set of 0.1" right angle header and sockets. I am able to find the pin headers but cannot find the matching sockets. Where do I find right angle sockets to mate with the 0.1" header pins? I don't really want to change my design to use straight pins and sockets but may have to if I cannot find what I want. Thus I am asking for direction: where do I find the parts I know exist? I am probably not calling them the right thing but have tried a number of different names over the last four hours. Any assistance would be appreciated.
Kevin. KD5ONS

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Brett Howard

Re: 0.1" right angle header and sockets

On Molex check out the C-Grid receptacles. If you're wondering how I
got there I looked up the pinned part on mouser then typed that family
into the molex website then clicked on the catalog page then it tells
you the mates with information. You can then search for that and then
find what you need. So if you search for C-Grid receptacles on molex's
site then you can get a part number for what you want. Once you have
that you can find all sorts of cross references.

this link may work:
http://www.molex.com/cgi-bin/bv/molex/jsp/products/listview.jsp?query=&offset=40&npp=20&sType=z&fs=productname:c-grid,III,(productseries:90147%20productseries:90151%20productseries:90148%20productseries:90152)&BV_SessionID=@@@@1037671541.1219297753@@@@&BV_EngineID=ccceadeelmlidiicflgcehedffgdfmk.0&channel=Products&Lang=english&autoNav=1&path=cHome%23%23-1%23%23-1~~ncPCBRECEPTACLES%23%230%23%232p&Itemlist=

On Thu, 2008-08-21 at 01:34 -0400, Kevin Rock wrote:

> I have been searching through Mouser and other catalogs for something I know exists. I have seen examples in both Elecraft kits and in other kits I have built. Now I want to find these parts for a project I am designing. I want a set of 0.1" right angle header and sockets. I am able to find the pin headers but cannot find the matching sockets. Where do I find right angle sockets to mate with the 0.1" header pins? I don't really want to change my design to use straight pins and sockets but may have to if I cannot find what I want. Thus I am asking for direction: where do I find the parts I know exist? I am probably not calling them the right thing but have tried a number of different names over the last four hours. Any assistance would be appreciated.
> Kevin. KD5ONS
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Jim Wiley-2

Re: 0.1" right angle header and sockets

In reply to this post by Kevin Rock

Aren't the sockets always "straight", with the pins (the part that
attaches to the PCB) either right angle or straight? check pages
1328-1329 of the Mouser Catalog 634 (May-July 2008) for a selection of
3M connectors that will probably fill the bill.

- Jim, KL7CC

Kevin Rock wrote:

geoff allsup

Re: 0.1" right angle header and sockets

In reply to this post by Kevin Rock

I've used SAMTEC straight sockets; assume they have right-angle too.

73,
geoff - W1OH

Kevin Rock wrote:

--
*************************************************************
Geoff Allsup, W1OH [hidden email] or [hidden email]
Research Engineer Upper Ocean Processes Group
Woods Hole Oceanographic Institution Woods Hole, MA, USA
*************************************************************

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Joe Planisky

Re: 0.1" right angle header and sockets

In reply to this post by Kevin Rock

Kevin,

Have you tried searching on Octopart ( http://octopart.com )? It's an
electronic parts search engine.

73
--
Joe KB8AP

On Aug 20, 2008, at 10:34 PM, Kevin Rock wrote:

> I have been searching through Mouser and other catalogs for
> something I know exists. I have seen examples in both Elecraft kits
> and in other kits I have built. Now I want to find these parts for
> a project I am designing. I want a set of 0.1" right angle header
> and sockets. I am able to find the pin headers but cannot find the
> matching sockets. Where do I find right angle sockets to mate with
> the 0.1" header pins? I don't really want to change my design to
> use straight pins and sockets but may have to if I cannot find what
> I want. Thus I am asking for direction: where do I find the parts I
> know exist? I am probably not calling them the right thing but have
> tried a number of different names over the last four hours. Any
> assistance would be appreciated.
> Kevin. KD5ONS
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

n6wg

Re: 0.1" right angle header and sockets

Does anyone know if there is a site that will
find SMD equivalents to standard parts?
I'm looking for an SMD equivalent to the
2N5109 transistor (if there is one).
Thanks and 73
Bob N6WG

----- Original Message -----
From: "Joe Planisky" <[hidden email]>
To: "List Discussion Elecraft" <[hidden email]>
Sent: Thursday, August 21, 2008 6:00 AM
Subject: Re: [Elecraft] 0.1" right angle header and sockets

> Kevin,
>
> Have you tried searching on Octopart ( http://octopart.com )? It's
an

> electronic parts search engine.
>
> 73
> --
> Joe KB8AP
>
> On Aug 20, 2008, at 10:34 PM, Kevin Rock wrote:
>
> > I have been searching through Mouser and other catalogs for
> > something I know exists. I have seen examples in both Elecraft

kits
> > and in other kits I have built. Now I want to find these parts
for
> > a project I am designing. I want a set of 0.1" right angle header
> > and sockets. I am able to find the pin headers but cannot find
the
> > matching sockets. Where do I find right angle sockets to mate
with
> > the 0.1" header pins? I don't really want to change my design to
> > use straight pins and sockets but may have to if I cannot find
what
> > I want. Thus I am asking for direction: where do I find the parts
I
> > know exist? I am probably not calling them the right thing but
have

> > tried a number of different names over the last four hours. Any
> > assistance would be appreciated.
> > Kevin. KD5ONS
> >
> > _______________________________________________
> > Elecraft mailing list
> > Post to: [hidden email]
> > You must be a subscriber to post to the list.
> > Subscriber Info (Addr. Change, sub, unsub etc.):
> > http://mailman.qth.net/mailman/listinfo/elecraft
> >
> > Help: http://mailman.qth.net/subscribers.htm
> > Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com