Hi,
I did my second «One Antenna, Two Radios» interface. I had this time
an ajustable RF amplifier to compensate for the loss by splitting the
signal. I only had what is loss... around 3 dB, no more. The design
could be used for more than 2 input/output because the gain is
«ajustable».
I also had a few LED to show the status when TX, ON or even when the
rf amp is ON. If I disconnect one radio, I am able to switch off the
amp because there is no more attenuation, so I will keep my signal a
«original» as it were before.
I really think that I convinced that I can easely add another K2 in
my shack.... the next step will be... One mic, two radios... and two
K2's !!!
If you want to take a look...
http://homepage.mac.com/jfmenard/PhotoAlbum57.htmlIt took me more hours than expected... I like to do thing properly...
maybe sometime too much, but anyway... it works great !!!
73
=============================================
/¯\/¯\/¯\/¯\/¯\/¯\ JEAN-FRANCOIS MENARD
V A 2 V Y Z
\_/\_/\_/\_/\_/\_/
FISTS #11896
Elecraft K2 #4130
Elecraft KX1 #999
http://homepage.mac.com/jfmenard=============================================
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
