144 module for K3

[Phil LaMarche-2]

With the power turned fully clockwise, what should the power reading be?
 
Phil
 
Philip LaMarche
 
LaMarche Enterprises, Inc
 
727-944-3226
727-937-8834 Fax
727-510-5038 Cell
 
www.w9dvm.com <http://www.w9dvm.com/>
 
K3 #1605
 
CCA 98-00827
CRA 1701
W9DVM
 
 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[N5GE]

On Thu, 06 May 2010 12:49:36 -0400, "Phil LaMarche"
<[hidden email]> wrote:

The power reading is 1.8db or 1.5mw on my K3 front panel.

Using the W2 software latest version, mine shows 9.5w on key down in
CW.  That's enough to drive my TE Systems 1542G to 300w out, which is
plenty for tropo and local SSB use.  When using CW it's good for at
least another 100 miles on 2m.

>With the power turned fully clockwise, what should the power reading be?
>
>Phil
>
>Philip LaMarche

TOM, N5GE BT 73 ES GUD LUK
AR DE N5GE SK

http://www.n5ge.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html