I believe the operation describe is possible now. You can receive on
another band with
the sub rx, with both receivers muted during transmit. I also listen for 6M
openings while
working on the HF bands. Of course you should use the AUX antenna port
connected to
a 6M antenna for the subrx. Your external antenna switching would then be
responsible
to connect the 6M antenna to the main antenna port if you choose to transmit
on 6.
What I am hoping for is the ability to tune the subrx (on either the same or
other band)
while transmitting, I realize I will need to watch the isolation between
the antennas,
but if the radio itself would handle this, I could use the sub rx to tune
the band for
other stations while I am transmitting.
Mark n2qt
(still hopefull)
Posted by: "hb9ari"
[hidden email] asga732000
Date: Sat Jan 21, 2012 1:01 am ((PST))
Hi Mark,
I've asked for this configuration to Elecraft some time ago,
before ordering a sub-rx for my K3,but no answer.
The idea was to monitor the 6m band, during my lower
bands JT65 activity. I was not asking to receive during
transmit (...). Loss of 6m RX "just" during transmit
JT65 frames was not a problem!
The goal was to switch on 6m TX/RX when some opening
was present. I thought that it should be possible...
my error.
Good luck Mark.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
