I have a few questions to people who have the 2nd RX option fitted.
My 2nd RX seems to be deaf, the difference between the two S meters is
if the main RX is showing S9, the second will show S1-2.
I installed my 2nd RX about 3 weeks ago and due being busy I have not
played around with it until today.
I have set everything up in the manual as prescribed, all filter
settings are the same as in 1st RX as I have mirrored the filtering.
The difference in the volume looking at the volume knobs is about 90
degrees, the 2nd RX volume knob being the one which is turned louder.
I can't think of anything off the top of my head which I have missed or
which is obvious and I'm looking to you guys if you had a similar problem.
I use ANT 1 socket for the main RX and ANT 2 socket for the 2nd RX. I
can share ANT 1 with 2nd RX. Using the sharing scheme the signals are
significantly different as described S9 & S1-2.
I have also swapped the antennas around and there has been no difference
which eliminates the antenna switching unit.
Any help would be greatly appreciated.
Berni
G0IDA
--
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
