On Feb 25, 2009, at 2:39 PM, W0MU Mike Fatchett wrote:
> Aux input. It appears that I can "share" my 4sq receive array with
> the aux
> input as I have the KXV3, by running a bnc cable from the KXV3 out to
> the
> Aux input.
Correct.
If you're using the RX antenna for both receivers at the same time, you
can just set the SUB's antenna to "MAIN" and turn on RX ANT.
If you want to use the RX antenna on the SUB, but stick with ANT1/2 for
the main receiver, set the SUB's antenna to "AUX" (after having tied it
to RX ANT IN with a BNC 'Y' cable).
73,
Wayne
N6KR
---
http://www.elecraft.com______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html