3rd Party K3 Compatibility Question

[Rick Tavan N6XI]

Please help me with an upcoming article on the K3 in NCJ.  I want to mention
some of the third party products that offer explicit support for the K3. I
know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
Router software and cables and Elecraft products like KRC2 and XVnnn. What
else?

Thanks & 73,

/Rick N6XI
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Simon (HB9DRV)]

USInterface.com's Navigator.

Simon Brown, HB9DRV

--------------------------------------------------
From: "Rick Tavan N6XI" <[hidden email]>

> Please help me with an upcoming article on the K3 in NCJ.  I want to
> mention
> some of the third party products that offer explicit support for the K3. I
> know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
> Router software and cables and Elecraft products like KRC2 and XVnnn. What
> else?
 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Jean-Claude Abauzit-2]

DXLab Suite

Jean-Claude PJ2BVU


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Joe Subich, W4TV-3]

All of the microHAM Interfaces plus microHAM Band Decoder and
microHAM Station Master also DXlab Suite (specifically CI-V
Commander the radio control application but also the entire
suite logger/digital ap/etc.).

73,

   ... Joe, W4TV
 

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Rick Tavan N6XI
> Sent: Sunday, June 22, 2008 1:43 AM
> To: Elecraft Reflector
> Subject: [Elecraft] 3rd Party K3 Compatibility Question
>
>
> Please help me with an upcoming article on the K3 in NCJ.  I
> want to mention some of the third party products that offer
> explicit support for the K3. I know about HRD, WinTest, N1MM,
> Top Ten decoder and DXD cables, microHAM Router software and
> cables and Elecraft products like KRC2 and XVnnn. What else?
>
> Thanks & 73,
>
> /Rick N6XI
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Simon (HB9DRV)]

N4PY's software has K3 support. In fact any code written for the K2 will
work with the K3, I didn't mention DXlab because I don't think Dave AA6YQ
has added any K3-specific code.

Simon Brown, HB9DRV

--------------------------------------------------
From: "Joe Subich, W4TV" <[hidden email]>

>
> All of the microHAM Interfaces plus microHAM Band Decoder and
> microHAM Station Master also DXlab Suite (specifically CI-V
> Commander the radio control application but also the entire
> suite logger/digital ap/etc.).
>
 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[NZ0T]

All N3FJP products are compatible with the K2 so should also be for the K3.

Rick Tavan N6XI wrote

Please help me with an upcoming article on the K3 in NCJ.  I want to mention
some of the third party products that offer explicit support for the K3. I
know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
Router software and cables and Elecraft products like KRC2 and XVnnn. What
else?

Thanks & 73,

/Rick N6XI
_______________________________________________
Elecraft mailing list
Post to: [e-mail]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Greg - N4CC]

Rick -- N8LP's products including LP-Pan.  73 de Greg

At 01:43 AM 6/22/2008, Rick Tavan N6XI wrote:

>Please help me with an upcoming article on the K3 in NCJ.  I want to mention
>some of the third party products that offer explicit support for the K3. I
>know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
>Router software and cables and Elecraft products like KRC2 and XVnnn. What
>else?
>
>Thanks & 73,
>
>/Rick N6XI
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[hf4me]

LP-PAN (http://www.telepostinc.com/LP-PAN.html) software defined IQ direct
conversion panadapter project and LP-100A Digital Vector Wattmeter
(http://www.telepostinc.com/n8lp.html#top) and by Larry Phippps N8LP.

73, Jim

----- Original Message -----
From: "Rick Tavan N6XI" <[hidden email]>
To: "Elecraft Reflector" <[hidden email]>
Sent: Sunday, June 22, 2008 12:43 AM
Subject: [Elecraft] 3rd Party K3 Compatibility Question


> Please help me with an upcoming article on the K3 in NCJ.  I want to
mention

> some of the third party products that offer explicit support for the K3. I
> know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
> Router software and cables and Elecraft products like KRC2 and XVnnn. What
> else?
>
> Thanks & 73,
>
> /Rick N6XI
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[N9BX]

Hi:

Also Logger32

Bruce N9BX 73

-------------- Original message from Greg - N4CC <[hidden email]>: --------------

> Rick -- N8LP's products including LP-Pan. 73 de Greg
>
> At 01:43 AM 6/22/2008, Rick Tavan N6XI wrote:
> >Please help me with an upcoming article on the K3 in NCJ. I want to mention
> >some of the third party products that offer explicit support for the K3. I
> >know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
> >Router software and cables and Elecraft products like KRC2 and XVnnn. What
> >else?
> >
> >Thanks & 73,
> >
> >/Rick N6XI
> >_______________________________________________
> >Elecraft mailing list
> >Post to: [hidden email]
> >You must be a subscriber to post to the list.
> >Subscriber Info (Addr. Change, sub, unsub etc.):
> > http://mailman.qth.net/mailman/listinfo/elecraft 
> >
> >Help: http://mailman.qth.net/subscribers.htm 
> >Elecraft web page: http://www.elecraft.com 
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft 
>
> Help: http://mailman.qth.net/subscribers.htm 
> Elecraft web page: http://www.elecraft.com 

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[ON4WIX]

You can also add G0CUZ's Winlog32 to the list.

73
Glenn ON4WIX
----- Original Message -----
From: <[hidden email]>
To: "Greg - N4CC" <[hidden email]>; "Rick Tavan N6XI" <[hidden email]>;
"Elecraft Reflector" <[hidden email]>
Sent: Sunday, June 22, 2008 4:08 PM
Subject: Re: [Elecraft] 3rd Party K3 Compatibility Question


Hi:

Also Logger32

Bruce N9BX 73

-------------- Original message from Greg - N4CC
<[hidden email]>: --------------

> Rick -- N8LP's products including LP-Pan. 73 de Greg
>
> At 01:43 AM 6/22/2008, Rick Tavan N6XI wrote:
> >Please help me with an upcoming article on the K3 in NCJ. I want to
> >mention
> >some of the third party products that offer explicit support for the K3.
> >I
> >know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
> >Router software and cables and Elecraft products like KRC2 and XVnnn.
> >What
> >else?
> >
> >Thanks & 73,
> >
> >/Rick N6XI
> >_______________________________________________
> >Elecraft mailing list
> >Post to: [hidden email]
> >You must be a subscriber to post to the list.
> >Subscriber Info (Addr. Change, sub, unsub etc.):
> > http://mailman.qth.net/mailman/listinfo/elecraft
> >
> >Help: http://mailman.qth.net/subscribers.htm
> >Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 270.4.1/1512 - Release Date: 21/06/2008
9:27

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Dave Hachadorian]

Unified Microsystems Band Decoder (with four pullup
resistors added).

Dave Hachadorian, K6LL
Yuma, AZ

----- Original Message -----
From: "Rick Tavan N6XI" <[hidden email]>
To: "Elecraft Reflector" <[hidden email]>
Sent: Saturday, June 21, 2008 10:43 PM
Subject: [Elecraft] 3rd Party K3 Compatibility Question

> Please help me with an upcoming article on the K3 in NCJ.
> I want to mention
> some of the third party products that offer explicit
> support for the K3. I
> know about HRD, WinTest, N1MM, Top Ten decoder and DXD
> cables, microHAM
> Router software and cables and Elecraft products like KRC2
> and XVnnn. What
> else?
>
> Thanks & 73,
>
> /Rick N6XI

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Tom-5]

My K3 is 100% compatible with my J-38 key!

   tom, k8tb




_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Joe Subich, W4TV-3]

> I didn't mention DXlab because I don't
> think Dave AA6YQ has added any K3-specific code.

Yes, the K3 is specifically supported.  Dave and I have been
exchanging e-mail on adding filter support for the K3 (FWxxx;
command).   Unfortunately there are a few issues ... Dual PB
filter is only available through the SWH command with no way
for the control program to know its state,  no way to select
the 1st IF filter,  and no way to set the center frequency.

I don't know if it wouldn't be better to wait on documentation
of the ! and @ commands.

73,

   ... Joe, W4TV
 

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Simon
> Brown (HB9DRV)
> Sent: Sunday, June 22, 2008 4:24 AM
> To: [hidden email]
> Subject: Re: [Elecraft] 3rd Party K3 Compatibility Question
>
>
> N4PY's software has K3 support. In fact any code written for
> the K2 will
> work with the K3, I didn't mention DXlab because I don't
> think Dave AA6YQ
> has added any K3-specific code.
>
> Simon Brown, HB9DRV
>
> --------------------------------------------------
> From: "Joe Subich, W4TV" <[hidden email]>
>
> >
> > All of the microHAM Interfaces plus microHAM Band Decoder
> and microHAM
> > Station Master also DXlab Suite (specifically CI-V
> Commander the radio
> > control application but also the entire suite
> logger/digital ap/etc.).
> >
>  

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[AA6YQ]

Simon, if you check out

http://www.dxlabsuite.com/commander/enhancements.htm

and

http://www.dxlabsuite.com/commander/versions.htm

you will see that Commander was initially extended to support the K3 in version 6.8.4, which was released in November 2007. Commander 7.0.2, released in March 2008, took additional advantage of the K3's extended command set.

As the K3's instruction set and documentation coalesces, I will continue to extend Commander to take advantage of its capabilities.

    73,

         Dave, AA6YQ

Simon Brown (HB9DRV) wrote

N4PY's software has K3 support. In fact any code written for the K2 will
work with the K3, I didn't mention DXlab because I don't think Dave AA6YQ
has added any K3-specific code.

Simon Brown, HB9DRV

[Gary, W7TEA]

MacLoggerDX

73, Gary W7TEA


<quote author="Rick Tavan N6XI">
Please help me with an upcoming article on the K3 in NCJ.  I want to mention
some of the third party products that offer explicit support for the K3. I
know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
Router software and cables and Elecraft products like KRC2 and XVnnn. What
else?

Thanks & 73,

/Rick N6XI

[Greg - AB7R]

TRX Manager.  

-------------------------
73,
Greg - AB7R
Whidbey Island WA
NA-065


On Mon Jun 23  7:04 , W7TEA  sent:

>
>MacLoggerDX
>
>73, Gary W7TEA
>
>
>
>Please help me with an upcoming article on the K3 in NCJ.  I want to mention
>some of the third party products that offer explicit support for the K3. I
>know about HRD, WinTest, N1MM, Top Ten decoder and DXD cables, microHAM
>Router software and cables and Elecraft products like KRC2 and XVnnn. What
>else?
>
>Thanks & 73,
>
>/Rick N6XI
>
>--
>View this message in context: http://www.nabble.com/3rd-Party-K3-Compatibility-

Question-tp18051445p18069976.html

>Sent from the Elecraft mailing list archive at Nabble.com.
>
>_______________________________________________
>Elecraft mailing list
>Post to: [hidden email]
>You must be a subscriber to post to the list.
>Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft   
>
>Help: http://mailman.qth.net/subscribers.htm
>Elecraft web page: http://www.elecraft.com

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Simon (HB9DRV)]

N1MM (was this already mentioned?). It's 28.2C here, I am melting.

http://pages.cthome.net/n1mm/html/English/SupportedRadios.htm

Simon Brown, HB9DRV

--------------------------------------------------
From: "W7TEA" <[hidden email]>

>
> MacLoggerDX
>
 
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Doug Faunt N6TQS [phone]]

Ha, it's 30C here, in Kitzbuhel, Austria, and there's thunder.  I have
several hundred kilometers of motorcycle ride in front of me to get to
F'stafen on Thursday, and it looks like both heat and rain between
here and there.

Is Elecraft going to have a presence at F'stafen?

73, doug

   From: "Simon Brown (HB9DRV)" <[hidden email]>
   Date: Mon, 23 Jun 2008 16:54:00 +0200

   N1MM (was this already mentioned?). It's 28.2C here, I am melting.

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com