4 band antenna for KX-1

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

4 band antenna for KX-1

Albers-2
Jay, W6CJ wrote:


Has anyone found some universal wire antenna lengths that will work
with the
KX-1 and internal antenna tuner - over all four (80, 40, 30, 20) bands?
   
  I bought a 50ft roll of speaker wire from Radio Shack and un-zipped the two wires so I had an antenna wire and a counterpoise. It turned out mine was 51 and a fraction feet long. I have not experimented with different lengths, just used what came on the spool. I find it loads very nicely on all 4 bands with the antenna wire as a sloper or inverted L, and the counterpoise stretched out or even place in a square or circle (e.g., around the periphery of a hotel room).
   
  Your results may vary, of course.
   
  73
   
  Ray K2HYD


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com