#5095 alive ;160m CAL PLL question

[Sjoerd PE2SVN]

Hello all,

First of all: My K2 is alive :-)

Second:
I installed the K160RX as the 'finishing touch' and went through the
instructions in the manual.
When trying to Calibrate the PLL for 160m my K2 said Info 232, which means I
have to
tune to 40m before Cal PLL. In the manual I see nothing about tuning to
7MHz.

Do I have to Cal PLL on 40m? will it 'see' that there is also a 160m kit
installed?
Or is this because I have made a mistake??

Tnx in advance,


Sjoerd
PE2SVN
K2 #5095 (it looks brand new:-))


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Sjoerd,

Check the errata sheet with the K160RX.  We used to do CAL PLL on each band,
but with Rev 2 firmware and above, CAL PLL is done only on 40 meters.  There
is no need to run CAL PLL when installing the K160RX.

73,
Don W3FPR

> -----Original Message-----
>
> First of all: My K2 is alive :-)
>
> Second:
> I installed the K160RX as the 'finishing touch' and went through the
> instructions in the manual.
> When trying to Calibrate the PLL for 160m my K2 said Info 232,
> which means I
> have to
> tune to 40m before Cal PLL. In the manual I see nothing about tuning to
> 7MHz.
>
> Do I have to Cal PLL on 40m? will it 'see' that there is also a 160m kit
> installed?
> Or is this because I have made a mistake??
>
> Tnx in advance,
>
>
> Sjoerd
> PE2SVN
> K2 #5095 (it looks brand new:-))
>
>

--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.344 / Virus Database: 267.10.21/96 - Release Date: 9/10/2005

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com