6 meter pre amp

[todd ruby-2]

Dear list members
I must be doing something wrong. I have connected the PR6 pre amp to the KXV3. I run the pwr lead to the accessory output. I leave it permanently on. When I go to 6 meters, the preamp icon comes on but if I push RX ANT to the “ON” position, it is as if I have disconnected the antenna. I also have the 2M module installed whose antenna input is connected to the RX ANT which was installed at Elecraft.

Can someone give me some guidance on the set up for correct operation of the pre amp?

tnx

73

todd
WB2ZAB
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]