600M transverter

[grumss]

I notice there is still talk about the 600M (472 to 479Khz) band and options for the K3/KX3

Just a reminder that i have  transverters available that work VERY well.
They have both RX and TX, RX features very tight filtering and high dynamic range, TX output is typically over 10W

As standard they work with a 28Mhz IF , but a 10MHz IF is available.

They are built and tested boards (but will need box/heatsink and switching.)

detailed information is available on my website    http://www.vk3xdk.net46.net/

price at the moment is AUS$180 (built and tested) (add postage)
I think this is extremely reasonable considering the hours of work involved (building/testing)

cheers, Graham VK3XDK

[grumss]

I should have mentioned that the K3 transverter out (around 0dbm) will typically drive the transverter to full output. (in some cases the IF  drive will need to be reduced by a few dbm's (easy on the K3)