I just had the same experience with #202 and latest firmware. I went to
CONFIG:PA TEMP and CONFIG: FP TEMP to see what they said... both
appeared normal. When I got out of the CONFIG menu I tried it again
(Tune, 100 w -> Dummy Load on 50.090) and it stayed on with no drop outs
like before. After 2 minutes I manually turned off the xmtr.
Hmmmmmm.....
73, Ken K3IU
~~~~~~~~~~~~~~~~~~~~~~~~~
Mike Kasrich wrote:
> Im going to read more on this thread but after glancing at it I went
> to 6m to see what if anything was happening here. My 6m xmit does
> unexplicably drop out. 100w to zero no warning no nothing. It does
> recover on it's own or through a band switch.
>
> I know this is a great receiver but Im having some concerns about K-3
> reliability. Being a contester I need rock solid on this point. Im
> still having an intermittent txco problem also. The txco xtal doesnt
> seem to sit too well in the ic socket on the ref. Im thinking out
> loud here but I wonder why the xtal just wasnt soldered on the board
> in the first place.
>
>
> Mike/aj9c
>
> _______________________________________________
> Elecraft mailing list
> Post to:
[hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>
http://mailman.qth.net/mailman/listinfo/elecraft
> Help:
http://mailman.qth.net/subscribers.htm> Elecraft web page:
http://www.elecraft.com>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
