I am not sure which transceiver you have, but on my K3S I had to use much
larger cables than the factory supplied to obtain 13.5v min when
transmitting. What voltage do you have when transmitting?
John KK9A
Sat Dec 30 21:51:50 EST 2017
Previous message: [Elecraft] KX2 CW tx decode for code practicing using
external straight key
Next message: [Elecraft] 80 meters
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
I seem to have low output on 75 phone. The most power I can put out is 71
watts. I can turn the power knob to 100 watts, but it backs down to 71
immediately. This is into an antenna and a dummy load.
I just checked 160 same thing except I get 83 watts
All other bands seem OK
Mal WA2TWA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
