90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

john@kk9a.com
Once I had an item for sale (on a real swap site) and someone pointed out
that my pricing was incorrect and too high. After some research I realize
that he was correct I was grateful for the information. Since then I have
notified a few people selling items when their pricing is way out of line
and most became offended, so I quit doing this. Often new items were
selling for the same price or less.

FWIW, I have purchased a lot of new FSJ4 connectors for ~$15 and FSJ4 for
~$1/ft in the surplus market. However you have to buy it when you see it
as it is not always available and you have take whatever length the coil
happens to be.

John KK9A

from: Bill Johnson k9yeq

Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the stuff
you mention.  The connectors are Andrews as well and are kits to install.  I
don't remember what I paid but may have been about what you did.  The
connectors were another story.  I lucked out with them.  They appear to be
lower in price.  I will match whatever someone comes up with and can give me
a link to verify.  This is excess to my needs and all I want is fair price.
This would only be useful for UHF and higher unless you are talking max
power and low loss.

73,
Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jim
Brown
Sent: Thursday, January 26, 2017 5:18 PM
To: elecraft at mailman.qth.net
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

FWIW -- I've bought a lot of used hard line, and I've never paid more than a
buck a foot for cut lengths of 1/2-in hard line in good or even new
condition. About five years ago, I paid $100 for 100 ft of LDF4-50 (1/2-in
Andrew) brand new. Don't remember if it had connectors on it or if I bought
them separately.

73, Jim K9YC

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Raymond Benny
Bill,

I will be buying a 250 - 300 ft spool of 1/2" hardline from a local
salvage/surplus store for $100. Guess you would consider it NOS. The wooden
spools themselves are in poor shape. Not certain that it is Andrews coax,
if not, its a very good copy.

Like John says, you buy it when you find a good bargain. Same with
connectors; at swap meets, used connectors are typically no more that $5
each. I guess if someone needs some hardline now, and could pick it up
locally, yours would be a fair price.

You can also often find 7/8", 100 - 130 ft  hardline pieces  for about $1 a
foot. Sometimes they may have a connector on one end included.

BTW, I agree with others, this is not an subject Elecraft and does not
belong here. I'm sending this email to the "TowerTalk" reflector where it
really should be.

73,

Ray,
N6VR

On Fri, Jan 27, 2017 at 10:32 AM, [hidden email] <[hidden email]> wrote:

> Once I had an item for sale (on a real swap site) and someone pointed out
> that my pricing was incorrect and too high. After some research I realize
> that he was correct I was grateful for the information. Since then I have
> notified a few people selling items when their pricing is way out of line
> and most became offended, so I quit doing this. Often new items were
> selling for the same price or less.
>
> FWIW, I have purchased a lot of new FSJ4 connectors for ~$15 and FSJ4 for
> ~$1/ft in the surplus market. However you have to buy it when you see it
> as it is not always available and you have take whatever length the coil
> happens to be.
>
> John KK9A
>
> from: Bill Johnson k9yeq
>
> Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the stuff
> you mention.  The connectors are Andrews as well and are kits to install.
> I
> don't remember what I paid but may have been about what you did.  The
> connectors were another story.  I lucked out with them.  They appear to be
> lower in price.  I will match whatever someone comes up with and can give
> me
> a link to verify.  This is excess to my needs and all I want is fair price.
> This would only be useful for UHF and higher unless you are talking max
> power and low loss.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of
> Jim
> Brown
> Sent: Thursday, January 26, 2017 5:18 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
> in box connectors FOR SALE
>
> FWIW -- I've bought a lot of used hard line, and I've never paid more than
> a
> buck a foot for cut lengths of 1/2-in hard line in good or even new
> condition. About five years ago, I paid $100 for 100 ft of LDF4-50 (1/2-in
> Andrew) brand new. Don't remember if it had connectors on it or if I bought
> them separately.
>
> 73, Jim K9YC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>



--
Ray,
N6VR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Bill K9YEQ
Ray,  Thank you.  I mistakenly posted on the reflector in response to
another thread then realized it was off topic, corrected it without
thinking.  I will post this as it is not conforming with list rules and I do
apologize.  MEA COPA as my wife with prompt me.  

73,
Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:[hidden email]] On Behalf Of
Raymond Benny
Sent: Friday, January 27, 2017 2:10 PM
To: [hidden email]
Cc: [hidden email]
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

Bill,

I will be buying a 250 - 300 ft spool of 1/2" hardline from a local
salvage/surplus store for $100. Guess you would consider it NOS. The wooden
spools themselves are in poor shape. Not certain that it is Andrews coax, if
not, its a very good copy.

Like John says, you buy it when you find a good bargain. Same with
connectors; at swap meets, used connectors are typically no more that $5
each. I guess if someone needs some hardline now, and could pick it up
locally, yours would be a fair price.

You can also often find 7/8", 100 - 130 ft  hardline pieces  for about $1 a
foot. Sometimes they may have a connector on one end included.

BTW, I agree with others, this is not an subject Elecraft and does not
belong here. I'm sending this email to the "TowerTalk" reflector where it
really should be.

73,

Ray,
N6VR

On Fri, Jan 27, 2017 at 10:32 AM, [hidden email] <[hidden email]> wrote:

> Once I had an item for sale (on a real swap site) and someone pointed
> out that my pricing was incorrect and too high. After some research I
> realize that he was correct I was grateful for the information. Since
> then I have notified a few people selling items when their pricing is
> way out of line and most became offended, so I quit doing this. Often
> new items were selling for the same price or less.
>
> FWIW, I have purchased a lot of new FSJ4 connectors for ~$15 and FSJ4
> for ~$1/ft in the surplus market. However you have to buy it when you
> see it as it is not always available and you have take whatever length
> the coil happens to be.
>
> John KK9A
>
> from: Bill Johnson k9yeq
>
> Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the
> stuff you mention.  The connectors are Andrews as well and are kits to
install.

> I
> don't remember what I paid but may have been about what you did.  The
> connectors were another story.  I lucked out with them.  They appear
> to be lower in price.  I will match whatever someone comes up with and
> can give me a link to verify.  This is excess to my needs and all I
> want is fair price.
> This would only be useful for UHF and higher unless you are talking
> max power and low loss.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf
> Of Jim Brown
> Sent: Thursday, January 26, 2017 5:18 PM
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2
> F4PNM new in box connectors FOR SALE
>
> FWIW -- I've bought a lot of used hard line, and I've never paid more
> than a buck a foot for cut lengths of 1/2-in hard line in good or even
> new condition. About five years ago, I paid $100 for 100 ft of LDF4-50
> (1/2-in
> Andrew) brand new. Don't remember if it had connectors on it or if I
> bought them separately.
>
> 73, Jim K9YC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]
>



--
Ray,
N6VR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Raymond Benny
Ron,

I do not agree.

Elecraft reflector should be about Elecraft products. Just like my Toyota
Tundra reflector, only Tundra products and happenings are discussed.

If the moderator allows anything, I maybe asking for receipts for chocolate
cookies to eat so that I can have a snack while operating my K3...

My 2 cents,

Ray,
N6VR

On Fri, Jan 27, 2017 at 6:12 PM, Ron D'Eau Claire <[hidden email]> wrote:

> You can be sure if a post does not belong here Eric, the list moderator,
> will say so.
>
> In his previous posts, Eric has stressed that *anything* of interest in
> setting up and operating a Ham station or in promoting Amateur Radio is
> okay
> provided the posters use discretion in the number of posts on a given
> subject.
>
> 73, Ron AC7AC
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of Bill
> Johnson
> Sent: Friday, January 27, 2017 4:48 PM
> To: 'Raymond Benny'; 'Elecraft Reflector'
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
> in box connectors FOR SALE
>
> Ray,  Thank you.  I mistakenly posted on the reflector in response to
> another thread then realized it was off topic, corrected it without
> thinking.  I will post this as it is not conforming with list rules and I
> do
> apologize.  MEA COPA as my wife with prompt me.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:[hidden email]] On Behalf Of
> Raymond Benny
> Sent: Friday, January 27, 2017 2:10 PM
> To: [hidden email]
> Cc: [hidden email]
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
> in box connectors FOR SALE
>
> Bill,
>
> I will be buying a 250 - 300 ft spool of 1/2" hardline from a local
> salvage/surplus store for $100. Guess you would consider it NOS. The wooden
> spools themselves are in poor shape. Not certain that it is Andrews coax,
> if
> not, its a very good copy.
>
> Like John says, you buy it when you find a good bargain. Same with
> connectors; at swap meets, used connectors are typically no more that $5
> each. I guess if someone needs some hardline now, and could pick it up
> locally, yours would be a fair price.
>
> You can also often find 7/8", 100 - 130 ft  hardline pieces  for about $1 a
> foot. Sometimes they may have a connector on one end included.
>
> BTW, I agree with others, this is not an subject Elecraft and does not
> belong here. I'm sending this email to the "TowerTalk" reflector where it
> really should be.
>
> 73,
>
> Ray,
> N6VR
>
> On Fri, Jan 27, 2017 at 10:32 AM, [hidden email] <[hidden email]> wrote:
>
> > Once I had an item for sale (on a real swap site) and someone pointed
> > out that my pricing was incorrect and too high. After some research I
> > realize that he was correct I was grateful for the information. Since
> > then I have notified a few people selling items when their pricing is
> > way out of line and most became offended, so I quit doing this. Often
> > new items were selling for the same price or less.
> >
> > FWIW, I have purchased a lot of new FSJ4 connectors for ~$15 and FSJ4
> > for ~$1/ft in the surplus market. However you have to buy it when you
> > see it as it is not always available and you have take whatever length
> > the coil happens to be.
> >
> > John KK9A
> >
> > from: Bill Johnson k9yeq
> >
> > Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the
> > stuff you mention.  The connectors are Andrews as well and are kits to
> install.
> > I
> > don't remember what I paid but may have been about what you did.  The
> > connectors were another story.  I lucked out with them.  They appear
> > to be lower in price.  I will match whatever someone comes up with and
> > can give me a link to verify.  This is excess to my needs and all I
> > want is fair price.
> > This would only be useful for UHF and higher unless you are talking
> > max power and low loss.
> >
> > 73,
> > Bill
> > K9YEQ
> >
> > -----Original Message-----
> > From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf
> > Of Jim Brown
> > Sent: Thursday, January 26, 2017 5:18 PM
> > To: elecraft at mailman.qth.net
> > Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2
> > F4PNM new in box connectors FOR SALE
> >
> > FWIW -- I've bought a lot of used hard line, and I've never paid more
> > than a buck a foot for cut lengths of 1/2-in hard line in good or even
> > new condition. About five years ago, I paid $100 for 100 ft of LDF4-50
> > (1/2-in
> > Andrew) brand new. Don't remember if it had connectors on it or if I
> > bought them separately.
> >
> > 73, Jim K9YC
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html Message delivered to
> > [hidden email]
> >
>
>
>
> --
> Ray,
> N6VR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message
> delivered to [hidden email]
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>
>


--
Ray,
N6VR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Bill K9YEQ
This is the guy who chewed me out.  I don’t disagree, on the other hand I did not propagate lots of traffic.  He is not a friendly.  Good luck. I have not and will not respond to him.  I don’t wish to fill the reflector with debate.  My listing was simple for one in need of the cable.  I have kept all the responses but one off line, in which I apologized.  Some HAMs have nothing better to do than be self asserting jerks.  Too bad as they don’t do well for the hobby, but no biggie here.  Without responses, his words become deaf.

73,
Bill
K9YEQ

From: Raymond Benny [mailto:[hidden email]]
Sent: Friday, January 27, 2017 8:51 PM
To: Ron D'Eau Claire <[hidden email]>
Cc: Bill Johnson <[hidden email]>; Elecraft Reflector <[hidden email]>
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Ron,

I do not agree.

Elecraft reflector should be about Elecraft products. Just like my Toyota Tundra reflector, only Tundra products and happenings are discussed.

If the moderator allows anything, I maybe asking for receipts for chocolate cookies to eat so that I can have a snack while operating my K3...

My 2 cents,

Ray,
N6VR

On Fri, Jan 27, 2017 at 6:12 PM, Ron D'Eau Claire <[hidden email]<mailto:[hidden email]>> wrote:
You can be sure if a post does not belong here Eric, the list moderator,
will say so.

In his previous posts, Eric has stressed that *anything* of interest in
setting up and operating a Ham station or in promoting Amateur Radio is okay
provided the posters use discretion in the number of posts on a given
subject.

73, Ron AC7AC

-----Original Message-----
From: Elecraft [mailto:[hidden email]<mailto:[hidden email]>] On Behalf Of Bill
Johnson
Sent: Friday, January 27, 2017 4:48 PM
To: 'Raymond Benny'; 'Elecraft Reflector'
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

Ray,  Thank you.  I mistakenly posted on the reflector in response to
another thread then realized it was off topic, corrected it without
thinking.  I will post this as it is not conforming with list rules and I do
apologize.  MEA COPA as my wife with prompt me.

73,
Bill
K9YEQ

-----Original Message-----
From: Elecraft [mailto:[hidden email]<mailto:[hidden email]>] On Behalf Of
Raymond Benny
Sent: Friday, January 27, 2017 2:10 PM
To: [hidden email]<mailto:[hidden email]>
Cc: [hidden email]<mailto:[hidden email]>
Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new
in box connectors FOR SALE

Bill,

I will be buying a 250 - 300 ft spool of 1/2" hardline from a local
salvage/surplus store for $100. Guess you would consider it NOS. The wooden
spools themselves are in poor shape. Not certain that it is Andrews coax, if
not, its a very good copy.

Like John says, you buy it when you find a good bargain. Same with
connectors; at swap meets, used connectors are typically no more that $5
each. I guess if someone needs some hardline now, and could pick it up
locally, yours would be a fair price.

You can also often find 7/8", 100 - 130 ft  hardline pieces  for about $1 a
foot. Sometimes they may have a connector on one end included.

BTW, I agree with others, this is not an subject Elecraft and does not
belong here. I'm sending this email to the "TowerTalk" reflector where it
really should be.

73,

Ray,
N6VR

On Fri, Jan 27, 2017 at 10:32 AM, [hidden email]<mailto:[hidden email]> <[hidden email]<mailto:[hidden email]>> wrote:

> Once I had an item for sale (on a real swap site) and someone pointed
> out that my pricing was incorrect and too high. After some research I
> realize that he was correct I was grateful for the information. Since
> then I have notified a few people selling items when their pricing is
> way out of line and most became offended, so I quit doing this. Often
> new items were selling for the same price or less.
>
> FWIW, I have purchased a lot of new FSJ4 connectors for ~$15 and FSJ4
> for ~$1/ft in the surplus market. However you have to buy it when you
> see it as it is not always available and you have take whatever length
> the coil happens to be.
>
> John KK9A
>
> from: Bill Johnson k9yeq
>
> Jim,  Thanks.  Can you buy this Heliax now for $1 per foot? This the
> stuff you mention.  The connectors are Andrews as well and are kits to
install.

> I
> don't remember what I paid but may have been about what you did.  The
> connectors were another story.  I lucked out with them.  They appear
> to be lower in price.  I will match whatever someone comes up with and
> can give me a link to verify.  This is excess to my needs and all I
> want is fair price.
> This would only be useful for UHF and higher unless you are talking
> max power and low loss.
>
> 73,
> Bill
> K9YEQ
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces<mailto:elecraft-bounces> at mailman.qth.net<http://mailman.qth.net>] On Behalf
> Of Jim Brown
> Sent: Thursday, January 26, 2017 5:18 PM
> To: elecraft at mailman.qth.net<http://mailman.qth.net>
> Subject: Re: [Elecraft] 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2
> F4PNM new in box connectors FOR SALE
>
> FWIW -- I've bought a lot of used hard line, and I've never paid more
> than a buck a foot for cut lengths of 1/2-in hard line in good or even
> new condition. About five years ago, I paid $100 for 100 ft of LDF4-50
> (1/2-in
> Andrew) brand new. Don't remember if it had connectors on it or if I
> bought them separately.
>
> 73, Jim K9YC
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]<mailto:[hidden email]>
>
> This list hosted by: http://www.qsl.net Please help support this email
> list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]<mailto:[hidden email]>
>



--
Ray,
N6VR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]<mailto:[hidden email]>

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to [hidden email]<mailto:[hidden email]>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]<mailto:[hidden email]>

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]<mailto:[hidden email]>



--
Ray,
N6VR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

Lynn W. Taylor, WB6UUT
In reply to this post by Raymond Benny
On most lists, including this one, the list moderator is the final
authority.  If he says it's okay, it's okay.

We can argue that it should be more restrictive, but ultimately, it's up
to Eric.

73 -- Lynn

On 1/27/2017 6:50 PM, Raymond Benny wrote:
> I do not agree.
>
> Elecraft reflector should be about Elecraft products. Just like my Toyota
> Tundra reflector, only Tundra products and happenings are discussed.

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

John K9UWA-2
Jeez Guys and Gals. Agree or disagree it is what it is.

One guy posts a for sale of some coax.
Three people post complaining about the price
TEN people complain or discuss the what and wherefore as to whether the post SHOULD or SHOULD NOT be posted to the
Elecraft reflector.

And here I am adding to the SPAM With all the people posting complaints or price or this stuff does or doesn't belong here
comments?

IF you don't want to read the post then hit the delete button. Much better than causing QRM.

Personally I hope the OP found a buyer for his coax.
73
John k9uwa

> On most lists, including this one, the list moderator is the final
> authority.  If he says it's okay, it's okay.
>
> We can argue that it should be more restrictive, but ultimately, it's up
> to Eric.


John Goller, K9UWA & Jean Goller, N9PXF
Antique Radio Restorations
[hidden email]
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
USA
1-260-637-6426

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

kstover
In reply to this post by Raymond Benny
Doesn't matter whether you agree or not. Those are the posted rules.

The moderator, Eric,one of the owners of Elecraft, has said in the past
exactly what Ron just said. So those are the rules. Don't like it,
that's a you problem.


On 1/27/2017 8:50 PM, Raymond Benny wrote:

> Ron,
>
> I do not agree.
>
> Elecraft reflector should be about Elecraft products. Just like my Toyota
> Tundra reflector, only Tundra products and happenings are discussed.
>
> If the moderator allows anything, I maybe asking for receipts for chocolate
> cookies to eat so that I can have a snack while operating my K3...
>
> My 2 cents,
>
> Ray,
> N6VR
>
>

--
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: 90 ' of 1/2" Andrew Heliax FSJ4-50B and 2 F4PNM new in box connectors FOR SALE

w0mu
Learn how to use the delete key.  So many list cops.

Just hit delete and move on.

How many extra posts were from all the list cops and the debate about
it?  50x more than the one post?

Yeah I just added on.  Use the delete key.

W0MU


On 1/28/2017 10:21 AM, Kevin wrote:

> Doesn't matter whether you agree or not. Those are the posted rules.
>
> The moderator, Eric,one of the owners of Elecraft, has said in the
> past exactly what Ron just said. So those are the rules. Don't like
> it, that's a you problem.
>
>
> On 1/27/2017 8:50 PM, Raymond Benny wrote:
>> Ron,
>>
>> I do not agree.
>>
>> Elecraft reflector should be about Elecraft products. Just like my
>> Toyota
>> Tundra reflector, only Tundra products and happenings are discussed.
>>
>> If the moderator allows anything, I maybe asking for receipts for
>> chocolate
>> cookies to eat so that I can have a snack while operating my K3...
>>
>> My 2 cents,
>>
>> Ray,
>> N6VR
>>
>>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]