A plea from 'Down Under'

[Bill Scovell]

Hi Jim,
Tks ur response.
1)As you repeatedly press the PRE/ATT button the annunciator moves predictably between PRE --- ATT --- and extinguishment, so do not think that solder bridge is the problem, however, if for example you switch off when the annunciator is indicating ATT or is extinguished when you switch on againthe annunciator is always indicating PRE.

2) Have explored the alternative side tone sources but to no avail --- Still looking!!!

Bill Scovell / VK4SQ
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Fletcher, Paul]

Just a stab in the dark here - after you turn the pre-amp off use the band +
/ band - buttons to change to a different band and back again. This forces
the controller to "remember" the settings for that band. After doing this
turn the K2 off and back on again and see if that has "fixed" the problem.
As I remember the K2 only stores settings after a period of time or when you
change bands. You may note be allowing enough time for the K2 to store it's
settings. Equally the band +/- trick will tell you if the controller is
storing anything.

Regards,
Paul (M1PAF)

-----Original Message-----
From: Bill Scovell [mailto:[hidden email]]
Sent: 16 August 2004 12:51
To: Elecraft
Subject: [Elecraft] A plea from 'Down Under'


Hi Jim,
Tks ur response.
1)As you repeatedly press the PRE/ATT button the annunciator moves
predictably between PRE --- ATT --- and extinguishment, so do not think that
solder bridge is the problem, however, if for example you switch off when
the annunciator is indicating ATT or is extinguished when you switch on
againthe annunciator is always indicating PRE.

2) Have explored the alternative side tone sources but to no avail --- Still
looking!!!

Bill Scovell / VK4SQ
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com


NNC's UK Operating Companies : NNC Holdings Limited (no. 3725076), NNC Limited (no. 1120437), National Nuclear Corporation Limited (no. 2290928), STATS-NNC Limited (no. 4339062) and Technica-NNC Limited (no. 235856).  The registered office of each company is at Booths Hall, Chelford Road, Knutsford, Cheshire WA16 8QZ except for Technica-NNC Limited whose registered office is at 6 Union Row, Aberdeen AB10 1DQ.  NNC's head office and principal address is Booths Hall and the switchboard number is 01565 633800.  The NNC website is www.nnc.co.uk

Any information or opinions in this message which do not relate to our business are not authorised by any of the above companies.  Where this message does relate to our business the content is sent to you by the relevant company (as above) and is confidential and intended for the use of the individual or entity to whom it is addressed.  The contents do not form part of any contract unless so stated.  If you have received this e-mail in error please notify the NNC system manager by email at [hidden email].

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft   
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com