A question on the P3 or actually the Tx Mon (K3)

[Elecraft mailing list]

A related question on this subject concerning the Tx Monitor. In terms of Power & SWR readings, can the Transmit Monitor be calibrated ? Or have other users found no need to adjust readings right out of the box? Reviewing the P3 manual on pages 34-35 there isn't much said about this subject.
73Paulkc2nyu
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Alan Bloom]

Yes, it can be calibrated in a manner similar to the W2.  The menu entry
is TXMonMenu/SensorCal.  There is a separate calibration stored for each
sensor type (200W/2000W, HF/VHF).

Alan N1AL


On 03/06/2017 08:26 AM, paul ecker via Elecraft wrote:

> A related question on this subject concerning the Tx Monitor. In
> terms of Power & SWR readings, can the Transmit Monitor be calibrated
> ? Or have other users found no need to adjust readings right out of
> the box? Reviewing the P3 manual on pages 34-35 there isn't much said
> about this subject. 73Paulkc2nyu
> ______________________________________________________________
> Elecraft mailing list Home:
> http://mailman.qth.net/mailman/listinfo/elecraft Help:
> http://mailman.qth.net/mmfaq.htm Post:
> mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net Please help support this
> email list: http://www.qsl.net/donate.html Message delivered to
> [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]