Accessing Filter Settings in KRX3

[Roy Morris-6]

I might have missed something or this just might be a dumb question.  How do the filters I have in the KRX3 kick in, and how can they be accessed (other than through CONFIG in SUB and the K3 Utility)?  In other words, is it possible to access KRX3 filters through XFIL?  It looks like the KRX3 filters are automatically selected depending on the bandwidth selected on the main receiver.  Is this right?  Roy Morris  W4WFB
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Joe Subich, W4TV-3]

Having just fought through the same issue ...

Enter the CONFIG menu, select the FLx options, then press SUB.
Pressing SUB is the key to getting into the filter configuration
items for the KRX3.  At that point, set the various frequencies
and gains ... don't for get to enable the appropriate fitters
for each mode.  LSB, USB, CW, DATA, AM and FM must EACH have
the appropriate filters enables/disabled individually.

73,

   ... Joe, W4TV
 

> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Roy Morris
> Sent: Sunday, September 21, 2008 4:58 PM
> To: [hidden email]
> Subject: [Elecraft] Accessing Filter Settings in KRX3
>
>
> I might have missed something or this just might be a dumb
> question.  How do the filters I have in the KRX3 kick in, and
> how can they be accessed (other than through CONFIG in SUB
> and the K3 Utility)?  In other words, is it possible to
> access KRX3 filters through XFIL?  It looks like the KRX3
> filters are automatically selected depending on the bandwidth
> selected on the main receiver.  Is this right?  Roy Morris  
> W4WFB

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Bill W4ZV]

Joe Subich, W4TV-3 wrote

Having just fought through the same issue ...

Enter the CONFIG menu, select the FLx options, then press SUB.
Pressing SUB is the key to getting into the filter configuration
items for the KRX3.  At that point, set the various frequencies
and gains ... don't for get to enable the appropriate fitters
for each mode.  LSB, USB, CW, DATA, AM and FM must EACH have
the appropriate filters enables/disabled individually.

It's much faster and easier to use Filter Configuration in the K3 Utility.

73,  Bill

[Barry N1EU]

Bill W4ZV wrote

Joe Subich, W4TV-3 wrote

Having just fought through the same issue ...

Enter the CONFIG menu, select the FLx options, then press SUB.
Pressing SUB is the key to getting into the filter configuration
items for the KRX3.  At that point, set the various frequencies
and gains ... don't for get to enable the appropriate fitters
for each mode.  LSB, USB, CW, DATA, AM and FM must EACH have
the appropriate filters enables/disabled individually.

It's much faster and easier to use Filter Configuration in the K3 Utility.

73,  Bill

I don't think either answer is actually what Roy was looking for (but I could be wrong).  He asked "how can they be accessed (other than through CONFIG in SUB and the K3 Utility)"?

I think he's looking for BSET - XFIL to do what he wants.

73,
Barry N1EU