Thanks for all the great responses. Seems I was on the right track. Fred's
book mentions that some day the ATU TUNE may control the KAT500 and that
had me wondering if I had something wrong.
Everything trained up nicely and I think I have the per-band op/stdby
powers set right. The KAT500 is in MAN and a backup was done after
training. Now it's time to get on the air.
Thanks and 73,
Kev N4TT
On Sat, Jun 15, 2019 at 4:35 PM Kevin, N4TT <
[hidden email]> wrote:
> I just got the second aux cable and have the physical setup completed
> according to the docs.
>
> The only configuration item that I changed was to set KAT500Y in
> CONFIG:KAT3. The K3s ATU is in bypass mode.
>
> I expected to be able to hit the ATU TUNE button on the K3s and initiate a
> tune through the KAT500. Is this not an option? When I hit ATU TUNE the
> display shows NO ATU.
>
> I also saw mention of setting power for barefoot and amp modes but I
> haven't figured out how that's set up. What prevents the K3s from sending
> too much power to the KPA500 in operate? Does it just know or do I have a
> setting I'm missing?
>
> 73,
> Kev N4TT
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
