Adding Sub receiver in K3

[VE3WDM]

Good evening all I have a K3 and want to add the sub receiver I have the new KSYN3A in my K3 but is my DSP board comparable? My DSP board in the K3 is rev C
Mike
VE3WDM
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Grant Youngman-2]

The “c” board is fine. If you haven’t done it, you might want to add the LPF board to it (K3DSPLPF) — that will make it functionally equivalent to a “D” board. Not required, though.

Grant NQ5T

Sent from my iPhone

> On Nov 19, 2017, at 3:52 PM, Mike Weir <[hidden email]> wrote:
>
> Good evening all I have a K3 and want to add the sub receiver I have the new KSYN3A in my K3 but is my DSP board comparable? My DSP board in the K3 is rev C
> Mike
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[Don Wilhelm]

Mike,

There is no mention of a specific level DSP board in the KRX3
installation manual, so it should work with any existing DSP board.

73,
Don W3FPR

On 11/19/2017 3:52 PM, Mike Weir wrote:
> Good evening all I have a K3 and want to add the sub receiver I have the new KSYN3A in my K3 but is my DSP board comparable? My DSP board in the K3 is rev C
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]

[VE3WDM]

Thank very much for the fast feedback
Mike
VE3WDM



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]