Am I missing something?

classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|

Am I missing something?

Paul VanOveren-2
I saw a couple of references here on the reflector about the 4.51 Beta firmware now being a production release. I do not see it on the Elecraft website under firmware category and I checked in the K3 Utility  1.12.3.28 ver.    Mine reads

                              MCU                  Installed  4.48    available 4.39
                              FPF                                       1.15                     1.14
                              DSP 1                                   2.73                     2.73
                              DSP 2                                   2.73                     2.73
                              DVR                                     1.03

    If I check versions available, it does not change. The K3 is communicating properly at 38,400 bps, running thru the P3.

Anyone else see this. ???

NF8J  Paul

                                     
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Am I missing something?

ve3dvy
Just looked  on the site and 4.51 is there and  the K3 utility shows it
as available as well.    When you land on the web page try refresh you
may be seeing a cached version of the page.


On 7/7/2012 8:01 AM, Paul VanOveren wrote:
>   I do not see it on the Elecraft website under firmware category and I checked in the K3 Utility  1.12.3.28 ver.    Mine reads

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Am I missing something?

David Pratt
In reply to this post by Paul VanOveren-2
4.51 is definitely there, Paul.  Make sure your K3 Utility is pointing
to the right directory.  ftp://elecraft.com/K3/firmware/

73

David G4DMP

In a recent message, Paul VanOveren <[hidden email]> writes

>I saw a couple of references here on the reflector about the 4.51 Beta
>firmware now being a production release. I do not see it on the
>Elecraft website under firmware category and I checked in the K3
>Utility  1.12.3.28 ver.    Mine reads
>
>                              MCU                  Installed  4.48
>available 4.39
>                              FPF 1.15                     1.14
>                              DSP 1 2.73                     2.73
>                              DSP 2 2.73                     2.73
>                              DVR                                     1.03
>
>    If I check versions available, it does not change. The K3 is
>communicating properly at 38,400 bps, running thru the P3.
>
>Anyone else see this. ???
>
>NF8J  Paul
--
  + - - - - - - - - - - - - - - - - +
  | David M Pratt, Kippax, Leeds.   |
  | Website: http://www.g4dmp.co.uk |
  + - - - - - - - - - - - - - - - - +

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Am I missing something?

Nate Bargmann
In reply to this post by Paul VanOveren-2
* On 2012 07 Jul 07:07 -0500, Paul VanOveren wrote:
> Anyone else see this. ???

Are you using the Linux version of the utility?  I ask because it would
not download the updated file listings correctly.  I worked with David
W4SMT and he did resolve the issue, but I'm not sure if the fixed
version is generally available.

73, de Nate, N0NB >>

--

"The optimist proclaims that we live in the best of all
possible worlds.  The pessimist fears this is true."

Ham radio, Linux, bikes, and more: http://www.n0nb.us
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Am I missing something?

Dick Dievendorff
In reply to this post by Paul VanOveren-2
Try copy new files from Elecraft

Dick, K6KR

Sent from my iPad

On Jul 7, 2012, at 5:01 AM, "Paul VanOveren" <[hidden email]> wrote:

> I saw a couple of references here on the reflector about the 4.51 Beta firmware now being a production release. I do not see it on the Elecraft website under firmware category and I checked in the K3 Utility  1.12.3.28 ver.    Mine reads
>
>                              MCU                  Installed  4.48    available 4.39
>                              FPF                                       1.15                     1.14
>                              DSP 1                                   2.73                     2.73
>                              DSP 2                                   2.73                     2.73
>                              DVR                                     1.03
>
>    If I check versions available, it does not change. The K3 is communicating properly at 38,400 bps, running thru the P3.
>
> Anyone else see this. ???
>
> NF8J  Paul
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: Am I missing something?

Ian Kahn, KM4IK
In reply to this post by Paul VanOveren-2
Paul,

I updated my firmware last night with no issues.  Double-check and make
sure you have the latest version of the K3 Utility installed.  I believe
it is required in order to update to all new firmware versions.

73,

--Ian

Ian Kahn, KM4IK
Roswell, GA  EM74ua
[hidden email]
K3 #281, P3 #688
HRD v5.x/6.0 Test Team

On 7/7/2012 8:01 AM, Paul VanOveren wrote:

> I saw a couple of references here on the reflector about the 4.51 Beta firmware now being a production release. I do not see it on the Elecraft website under firmware category and I checked in the K3 Utility  1.12.3.28 ver.    Mine reads
>
>                                MCU                  Installed  4.48    available 4.39
>                                FPF                                       1.15                     1.14
>                                DSP 1                                   2.73                     2.73
>                                DSP 2                                   2.73                     2.73
>                                DVR                                     1.03
>
>      If I check versions available, it does not change. The K3 is communicating properly at 38,400 bps, running thru the P3.
>
> Anyone else see this. ???
>
> NF8J  Paul
>
>                                        
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html