Ameritron AL-811H with K2 & KPA100

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Ameritron AL-811H with K2 & KPA100

JEAN-FRANCOIS MENARD-3
I bought an used linear amp Ameritron AL-811H for half of the price  
of a new one. I just want to make sure I'm right. This is the first  
linear amp like this one I have.

If I want to connect my KPA100 to an Ameriton AL-811H, what should I  
do ?

It seems that Relay control conector behind the AL-811H is keyed when  
grounded, and the K2/KPA100 is keyed when positive !?!?

Thanks for your help.

73

======

Jean-François Ménard / VA2VYZ

======


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply | Threaded
Open this post in threaded view
|

Re: Ameritron AL-811H with K2 & KPA100

JEAN-FRANCOIS MENARD-3
Thanks Donald !!!! ;-) I was not sure...

Le 05-08-06 à 15:23, Donald Nesbitt a écrit :

> Everything you need is already built into the KPA100.  The KPA100  
> will key a
> positive voltage to ground and the AL-811H has a positive voltage  
> on the RCA
> relay connection on the rear which must be grounded to place the  
> AL-811H in
> the "transmit" condition.  Simply connect a cable with RCA plugs on  
> each end
> between the Relay connection on the AL-811H and the "PA Key Out"  
> socket on
> the rear of the KPA100.  Voila!  Have fun! 73 -- Don N4HH K2/100  
> #2028,
> KAT100, K1 #1456, etc, etc.
>
> ----- Original Message -----
> From: "JEAN-FRANCOIS MENARD" <[hidden email]>
> To: "Elecraft - Mailing List Elecraft - Maling List"
> <[hidden email]>
> Sent: Saturday, August 06, 2005 3:06 PM
> Subject: [Elecraft] Ameritron AL-811H with K2 & KPA100
>
>
> I bought an used linear amp Ameritron AL-811H for half of the price
> of a new one. I just want to make sure I'm right. This is the first
> linear amp like this one I have.
>
> If I want to connect my KPA100 to an Ameriton AL-811H, what should I
> do ?
>
> It seems that Relay control conector behind the AL-811H is keyed when
> grounded, and the K2/KPA100 is keyed when positive !?!?
>
> Thanks for your help.
>
> 73
>
> ======
>
> Jean-François Ménard / VA2VYZ
>
> ======
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.338 / Virus Database: 267.10.1/64 - Release Date: 8/4/05
>
>
>
>
> --
> No virus found in this outgoing message.
> Checked by AVG Anti-Virus.
> Version: 7.0.338 / Virus Database: 267.10.1/64 - Release Date: 8/4/05
>
>

======

Jean-François Ménard / VA2VYZ

======


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com