Ameritron ARI-500 and K3?

[nz8j]

        Hi,

        Has anyone used an Ameritron ARI-500 to automatically bandswitch
an Ameritron ALS-500 amplifier with their K3? If so I'd like the details
on how it was accomplished.

        Thanks
        Tim
        Nz8J
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Phil Salas]

I use the ARI-500 with my ALS-600.  Should be the same hookup.  The K3 band
data output is identical to the Yaesu band data output.  The ARI-500
interprets it just fine.  If you have an early K3 you do need the TTL
pull-up mod.  My ARI-500 manual has the wiring information.  Email me at
[hidden email] and I can email you the manual if you have an older version of
the manual without this info.

Phil - AD5X

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html