Amplifier Keying Circuit

[andreap-2]

I'm considering buying a K-2 with the N0SS amplifier keying circuit already installed.  I will not be running an amp but do plan on installing the SSB board, internal antenna tuner, and battery.  Will the amp keying mod physically interfere with my planned installations? Thanks

Joe, AA0Q
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Tom Hammond-2]

Hi Joe:

>I'm considering buying a K-2 with the N0SS amplifier keying circuit
>already installed.  I will not be running an amp but do plan on
>installing the SSB board, internal antenna tuner, and battery.  Will
>the amp keying mod physically interfere with my planned installations? Thanks

The K2 External T-R Keying circuit plugs into the 8-pin header normally
used for the transverter PC board and should NOT effect your operations
as all.

If, in the future, you decide to install the transverter adapter, you just
pull the T-R keying adapter out and replace it with the transverter PC board.

For your info, the K2 External T-R Keying adapter will key the T-R line of an
external RF amp at up to +200VDC at 5A if needed.

73,

Tom Hammond   N0SS

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com