And now, for my next trick...

[Vin Cortina]

Hey everybody.

Welcome home to our intrepid Dayton attendees.  I hope to be at Dayton at
least once in my life, but now to the crux of the matter.
I plan to build a KX-1 next.  I can't afford to get all the accessories at
once, but I do want eventually to put in the 30/80 option, the ATU, and the
paddle.
So the question.  Does it really matter if I put the 30/80 in before the ATU
or visa versa.  I suspect not, but I would rather save myself having to
change any components on one just a month or so after initial install.
(Cutting traces, changing parts, jumping microcircuits, etc).

Thanks in advance for your advice and counsel.  I already know I will be
greeted by a wave of information which will answer my question.

Best Wishes,

Vin  KR2F
K1 s/n:1977

P.S.  I PROMISE not to run this package over.  Remember when I put the dummy
load and RF probe package on my car's roof and drove away?
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

[Don Wilhelm-3]

Vin,

If you follow the instructions for the KXB3080 "to the letter", it will not
make any difference...

BUT -- there is some close fits between the KXAT1 relay cases and the LPF
assembly for the KXB3080, so it would be better to build the KAT1 first, and
then you can adjust the physical position of the KXB3080 to properly fit
into the spaces while allowing the KXAT1 to still fit properly.

73,
Don W3FPR

-----Original Message-----

Welcome home to our intrepid Dayton attendees.  I hope to be at Dayton at
least once in my life, but now to the crux of the matter.
I plan to build a KX-1 next.  I can't afford to get all the accessories at
once, but I do want eventually to put in the 30/80 option, the ATU, and the
paddle.
So the question.  Does it really matter if I put the 30/80 in before the ATU
or visa versa.  I suspect not, but I would rather save myself having to
change any components on one just a month or so after initial install.
(Cutting traces, changing parts, jumping microcircuits, etc).

Thanks in advance for your advice and counsel.  I already know I will be
greeted by a wave of information which will answer my question.

Best Wishes,

Vin  KR2F
K1 s/n:1977


--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.392 / Virus Database: 268.6.1/344 - Release Date: 5/19/2006

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com