Does anyone have the assembly instructions for the old Andrew L4NM N male
connector for Andrew ½ hardline. The L4NM is an obsolete connector and has
replaced by the L4NM-C. The connector I have has the separate silver pin
that is soldered to the end of the cable center conductor and then assembled
into the body of the connector much like a standard N connector. The
center conductor of the newer connector version is not soldered but is held
in compression against the center pin much like the Eupen connector system.
None of the sites I searched have a copy of the instructions posted.
73s, v/r terry N4ZH
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
