Lee J. Imber (WW2DX) wrote:
> Perfect, that looks like it works, I kick off the M1 then send a
> k31;swt37; and it stops :)
>
> Thanks again!
>
> Lee
> -WW2DX
> On Mar 3, 2009, at 10:39 PM, Bill Coleman wrote:
>
>> Lee J. Imber (WW2DX) wrote:
>>> Hi All,
>>>
>>> OK, so have the logger(RUMped) now keying the DVR in the K3
>>> directly (very cool), next question is is there a way to send an
>>> abort to the K3 through the serial line to stop the DVR while its
>>> playing? Just like if you tap the M1 to play a canned CQ in SSB
>>> then tap the RIT button to abort the transmission?
>>>
>>> Thanks again,
>>>
>>> Lee
>>> -WW2DX
>>>
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home:
http://mailman.qth.net/mailman/listinfo/elecraft>>> Help:
http://mailman.qth.net/mmfaq.htm>>> Post: mailto:
[hidden email]
>>>
>>> This list hosted by:
http://www.qsl.net>>> Please help support this email list:
http://www.qsl.net/donate.html>>>
>>>
>>>
>> Hi Lee, I have not tried it via programming.... but the book says tap
>> REC for cancel. SWT37; should do the same.
>> 73, Bill N2BC
>
>
>
Hello again Lee... I've been playing with it. I cannot find a way to
programatically tell that a message is 'running'... Without knowing
that, issuing SWT37; when the message has ended will setup a record
function.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
