Just got my KX3 package today, and assembly was a few hours without much
trouble. Only thing that was somewhat unclear was getting the thermal
material between the main case and the metal heat sink. If I took the
clear plastic part off first, it wouldn't fit on the heat sink as the
directions showed. Then it dawned on me to stick it on the back of the
main case, where it was easy to pull the white part off, and all is
well. It worked when fired up and listening around 40 meter CW, so now
after dinner back to the shack to learn the details!
Thanks to all at Elecraft!
John K0JD
Milwaukee, WI
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
