Another LP PAN question

[N1IX-2]

I finally have things working more or less.
What I see on the SDR screen doesn't seem to be what is going on on the band.
I suspect my in my setup the IF frequency is not correct.
Can someone tell me the correct settings for the K3?

Dave N1IX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Hi Dave,
to get the SDR and the K3 to match, click on the WWV button and use this to set the if frequency Global offset. That will put you right on the mark..Its in the Softrock if stage tab...

Don...w2xb

N1IX-2 wrote

I finally have things working more or less.
What I see on the SDR screen doesn't seem to be what is going on on the band.
I suspect my in my setup the IF frequency is not correct.
Can someone tell me the correct settings for the K3?

Dave N1IX
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[e-mail]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Greg - AB7R]

I used my sig generator and use the k3 auto spot to zero beat.  Then  
adjusted the offset till the two tones matched (listening to the k3  
and power sdr at the same time.

Greg

Sent from my iPhone

On Jul 24, 2009, at 6:25 PM, W2XB <[hidden email]> wrote:

>
> Hi Dave,
> to get the SDR and the K3 to match, click on the WWV button and use  
> this to
> set the if frequency Global offset. That will put you right on the  
> mark..Its
> in the Softrock if stage tab...
>
> Don...w2xb
>
>
>
> N1IX-2 wrote:
>>
>> I finally have things working more or less.
>> What I see on the SDR screen doesn't seem to be what is going on on  
>> the
>> band.
>> I suspect my in my setup the IF frequency is not correct.
>> Can someone tell me the correct settings for the K3?
>>
>> Dave N1IX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>>
>
> --
> View this message in context: http://n2.nabble.com/Another-LP-PAN-question-tp3312709p3323639.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html