Hi all,
A friend gave me a Gamma LH-085 telecommunication headset. The headphone is
32 ohms. I found in K2 manual that it will work with almost any headphone.
So that part seems to be OK.
The microphone specs say it is "Dynamic 19mm 200 ohms".
If I attempt at connecting this headset to the K2, would the 200 ohms cause
any problem? I could not find any info about this in the K2 manual (as
opposed to say the FT857 manual, which says it would work with micropohes
in the 200-600 ohm range). The only info I could find was that a 600 ohm
microphone would work.
73!
de TA2RX
----------------------------------
Bekir Kemal Ataman
ArchiMac BBS Sysop & Webmaster <
http://www.archimac.org/>
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
