The temporary solution to the problem is to disable the data display before entering SPLIT mode. It appears that it WILL remain in SPLIT when you re-enable the data display .
Jim - W0EB
>The problem I reported IS global. It occurs on all bands. With the P3 SVGA's data display enabled, it seems to inhibit the K3 from >actually entering SPLIT mode even though the "SPLIT" indicator shows in the K3's LCD display. I've confirmed by measuring the >K3's output with a frequency counter that even though SPLIT is showing, the K3 is still transmitting on VFO A's frequency. The >VFO B does not change to RED . The VFO B frequency DOES read the frequency it's set at and the purple cursor moves >properly as you change the VFO B frequency.
>
>FW in use in the K3 is 4.51 and in the P3, Beta 01.17 as reported by both devices.
>
>Jim Sheldon - W0EB
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
