Man I must admit I really dig the ability to move the CF... On
numerous occasions I'd be listening to a QSO and I'd want to look over
and check another portion of the band.... However in PowerSDR I
wasn't able to do this without leaving my current frequency. This was
an even bigger problem in that my sound card was only a 96Khz version.
However I really dig that with the P3 I can move the center frequency
over and look at the CW portion of the band even if I'm up at the top
end of that band.
Very cool!
~Brett (N7MG)
PS: another thing that I really like about the P3 is that the
resolution of the data displayed remains the same no matter what I
have my span set to. In powerSDR with the LP-PAN you've got a fixed
sample rate and thus your data points are greatly spread out when
using narrow spans. Not so with the P3.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
