The B VFO doesn’t do anything in diversity receive. Both receivers are driven by the A synth. B VFO is only used for a split transmit frequency if you want.
You are thinking of the VFO LINK mode where B follows A with a given split.
Ken K6MR
________________________________
From:
[hidden email] <
[hidden email]> on behalf of Rich <
[hidden email]>
Sent: Tuesday, April 30, 2019 2:41:01 PM
To:
[hidden email]
Subject: [Elecraft] Appears that VFO is not tracking in diversity.
Have read the manual and the various postings here and can not find problem.
When I turn on Diversity the B VFO does not track, and stays at the same
freq. Know it was working 6 months ago. Is there an obvious setting that
could not be correct? KC dot is flashing, Diversity ON comes up and then
DIVERSITY flashes (sometimes). Arrow is pointing at A and SUB is on in
display. Both receivers are working as determined by adjusting RF and AF
Separately. Can tell it is in diversity while listening to a QSO as one
seems louder in one ear and vs/vs.
Any help appreciated.
--
Sent from:
http://elecraft.365791.n2.nabble.com/______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
