Assigning Macros to PF1 on KX3

[Jeff Hetherington]

Hello all.

I only typically scan the headers in the digest mode here, so please point me in the right direction if I missed something.

Jim mentioned on his macro for Split operation that the macros could be assigned to the PF1 / PF2 keys on the KX3 as outlined in the manual.  I can't seem to locate it in the manual.  Can somebody point me in the right direction?

Thanks.
73/72

==================
L. Jeffrey Hetherington
VA3JFF / VE3CW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

That information is not yet in the manual.  It is only available in
Field Test firmware at the moment.
See Wayne Burdick's post on 02/27/2013.  If you want to try it, send
Wayne an email direct.

73,
Don W3FPR

On 3/4/2013 6:17 PM, Jeff Hetherington wrote:
> Hello all.
>
> I only typically scan the headers in the digest mode here, so please point me in the right direction if I missed something.
>
> Jim mentioned on his macro for Split operation that the macros could be assigned to the PF1 / PF2 keys on the KX3 as outlined in the manual.  I can't seem to locate it in the manual.  Can somebody point me in the right direction?
>
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html