I have never seen the Powerpole adapter but that seems like and elegant
solution. You could even use 6awg wire with that connector if you had a
longer power supply/battery cable.
John KK9A
Phil Kane k2asp wrote:
On 4/11/2018 9:14 AM, Don Wilhelm wrote:
> John and all,
>
> You can splice a short (3 to 4 inches) length of #12 wire to the #8 or
> #10 wire and it will not have negligible voltage drop due to the short
> length.
Or use an APP 75A fitting with 8 AWG wire and the APP 75A-30A reducing
adapter (with or without the above-recommended pigtail) to the 30A-size
fitting on the transceiver (I do that for my K2/100). The battery and
power-supply leads to my distribution system, however, are 4 AWG with
crimped lugs and stud mounts.
73 de K2ASP - Phil Kane
Elecraft K2/100 s/n 5402
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]