It sure will Doug and it is very nice. You need the KPAK3AUX cable set connecting the K3 to the KPA500 and need to set the K3 PWR SET to Per Band.
See my K-Line introduction and short set-up guide at:
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide73,
Fred KE7X
"The Elecraft K3: Design, Configuration and Operation 2nd ed"
"The Elecraft KX3 - Going for the summit"
www.ke7x.com or www.lulu.com
(Coming soon: "The Elecraft KPA500 and KAT500 - the K-Line Dream Station")
-----Original Message-----
From:
[hidden email] [mailto:
[hidden email]] On Behalf Of Doug Welborn
Sent: Monday, February 24, 2014 7:36 AM
To:
[hidden email]
Subject: [Elecraft] Auto power set K-3 with KPA-500
Does anyone know if the K3 will automatically reduce power when the
KPA500 is in "operate mode"
and then return to previous power setting when KPA500 is returned to "Standby". It is easy to forget sometimes to set or reset the power on K3 for the KPA500.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
