BND end message

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

BND end message

David F. Reed-2
  Folks,

I recently received the "BND end" message while trying to operate (MARS)
around 7.5 MHz. +/- a bit.

I have used the elecraft software to "open up" the allowed transmission
range; I do seem to remember there were still some areas to avoid; is
this one of them, and if so, could I get reminded of what all they are?

Is there a more recent update to that software?  I lost mine in a recent
computer crash...

Thanks and 73 de Dave, W5SV / NNN0SLA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: BND end message

Matt Zilmer
Hi Dave,

The K3's IF is at 8.3 MHz.  There is a lockout in the spectrum around
this frequency.  I think it's from 7.5 to 9 MHz, but not positive. You
can RX anywhere, but TX is disabled for the range near 8.3 MHz.

If you contact [hidden email], I think Brian can get you a
copy of the latest software.  You will have to show a copy of your
MARS credentials.  The Membership Card is probably good enough for
this.

73,
matt W6NIA / NNN0UET

==

On Mon, 13 Sep 2010 14:27:51 -0500, you wrote:

>  Folks,
>
>I recently received the "BND end" message while trying to operate (MARS)
>around 7.5 MHz. +/- a bit.
>
>I have used the elecraft software to "open up" the allowed transmission
>range; I do seem to remember there were still some areas to avoid; is
>this one of them, and if so, could I get reminded of what all they are?
>
>Is there a more recent update to that software?  I lost mine in a recent
>computer crash...
>
>Thanks and 73 de Dave, W5SV / NNN0SLA
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email]
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Reply | Threaded
Open this post in threaded view
|

Re: BND end message

David F. Reed-2
  Thanks to all who replied it was most helpful and I am up and running
as desired, with power limitations as appropriate for the close
proximity to the IF.

Cheers & 73 de Dave, W5SV / NNN0SLA
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html