Backup/Restore current configuration via file

[ik1bxn]

Is it a way to dump to a file the current k3 configuration ? I think to all settings, for example to activate   digimodes with my Signalink interface I touched mode, line level input and so on. My goal should be to have a reliable restore point to rollback in cause of my errors during future setting modification temptatives. Many thanks to everybody, HNY 2011 and 73 - Giorgio

[Cady, Fred]

You can use the K3 Utility Program to save the configuration and then
restore it later if you need to. Or are you wanting a hard copy of the
configuration info?

-----Original Message-----
From: [hidden email]
[mailto:[hidden email]] On Behalf Of ik1bxn
Sent: Saturday, January 08, 2011 12:25 PM
To: [hidden email]
Subject: [Elecraft] Backup/Restore current configuration via file


Is it a way to dump to a file the current k3 configuration ? I think to
all
settings, for example to activate   digimodes with my Signalink
interface I
touched mode, line level input and so on. My goal should be to have a
reliable restore point to rollback in cause of my errors during future
setting modification temptatives. Many thanks to everybody, HNY 2011 and
73
- Giorgio
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Backup-Restore-current-configuratio
n-via-file-tp5902987p5902987.html
Sent from the [K3] mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[ik1bxn]

Hi Fred (I think this is your firstname) yes I wonder if there is  a way to copy the configuration info. I see there's another utility called K3_EZ that many collegues appreciated, but I did not try it right now.

My question starts from this: I noticed collegues having problems setting k3 for digimodes using external card . I suffered too with my signalink but in a short time I was operating (thanks to help I found here). Now I'd like to help who's posting question in this matter,  but to do this I would navigate deeply into menus to find what I touched to have my k3 running in digi via signalink. If I had a dump of my configuration I should have had the possibility to help in easier way I think.

73 and thanks. Giorgio

[ik1bxn]

Hi Fred (I think this is your firstname) yes I wonder if there is  a way to
copy the configuration info. I see there's another utility called K3_EZ that
many collegues appreciated, but I did not try it right now.

My question starts from this: I noticed collegues having problems setting k3
for digimodes using external card . I suffered too with my signalink but in
a short time I was operating (thanks to help I found here). Now I'd like to
help who's posting question in this matter,  but to do this I would navigate
deeply into menus to find what I touched to have my k3 running in digi via
signalink. If I had a dump of my configuration I should have had the
possibility to help in easier way I think.

73 and thanks. Giorgio
--
View this message in context: http://elecraft.365791.n2.nabble.com/Backup-Restore-current-configuration-via-file-tp5902987p5904182.html
Sent from the [K3] mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html