Bad tx audio.

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Bad tx audio.

Dick Frey
I had several "Bad Audio" reports in SS. One I can Ignore, more than that I
believe.

I have a K3 with the recorder.  To test it, I ran the K3 into a dummy load
and listened to the tx signal on another receiver. The resulting signal was
indeed crappy both with the mic and on recording.
I reduced power to almost nil, changed mics, removed all other connections
to the rig except power coax and mic. Still had lousy audio.

What am I missing?

--
Dick - K4XU
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Bad tx audio.

k6dgw
Define "lousy?"

73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County

On 12/6/2018 4:20 PM, Dick Frey wrote:

> I had several "Bad Audio" reports in SS. One I can Ignore, more than that I
> believe.
>
> I have a K3 with the recorder.  To test it, I ran the K3 into a dummy load
> and listened to the tx signal on another receiver. The resulting signal was
> indeed crappy both with the mic and on recording.
> I reduced power to almost nil, changed mics, removed all other connections
> to the rig except power coax and mic. Still had lousy audio.
>
> What am I missing?
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Bad tx audio.

Wes Stewart-2
In reply to this post by Dick Frey
Blown LPA, HPA one or both would be my guess. An all to common problem.

Wes N7WS


Sent from my iPhone

> On Dec 6, 2018, at 5:20 PM, Dick Frey <[hidden email]> wrote:
>
> I had several "Bad Audio" reports in SS. One I can Ignore, more than that I
> believe.
>
> I have a K3 with the recorder.  To test it, I ran the K3 into a dummy load
> and listened to the tx signal on another receiver. The resulting signal was
> indeed crappy both with the mic and on recording.
> I reduced power to almost nil, changed mics, removed all other connections
> to the rig except power coax and mic. Still had lousy audio.
>
> What am I missing?
>
> --
> Dick - K4XU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
Reply | Threaded
Open this post in threaded view
|

Re: Bad tx audio.

Bob McGraw - K4TAX
In reply to this post by Dick Frey
Define "crappy audio"?   Distorted, thin, muffled, humm, buzz, noisy, scratchy, bassy .......

Some could be radio adjustments, some could be component failure, some bad mike, some could be power supply, some could be power cables/connectors, and ?????

Bob, K4TAX


Sent from my iPhone

> On Dec 6, 2018, at 6:20 PM, Dick Frey <[hidden email]> wrote:
>
> I had several "Bad Audio" reports in SS. One I can Ignore, more than that I
> believe.
>
> I have a K3 with the recorder.  To test it, I ran the K3 into a dummy load
> and listened to the tx signal on another receiver. The resulting signal was
> indeed crappy both with the mic and on recording.
> I reduced power to almost nil, changed mics, removed all other connections
> to the rig except power coax and mic. Still had lousy audio.
>
> What am I missing?
>
> --
> Dick - K4XU
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]