Hi John,
No, you can make use of the frequency measurement and band changing capabilities of the KPA500 and KAT500.
You look here for a couple of guides for the KAT and KPA.
http://www.ke7x.com/home/k-line-introduction-and-set-up-guide73 and cheers,
Fred KE7X
For all KE7X Elecraft manuals, see www.ke7x.com
________________________________
From:
[hidden email] <
[hidden email]> on behalf of John Clemmer <
[hidden email]>
Sent: Tuesday, July 17, 2018 12:44 PM
To:
[hidden email]
Subject: [Elecraft] Band switching with the KPA 500
Good afternoon. Reading the manual while I am waiting for parts. will be here tomorrow. I see that there is auto band switching available. I will be using a flex 6400M with the KPA and the KAT 500. I see that it talks about an aux cable. Is this cable needed to accomplish band auto band switching.
John
KB4OIF
Proud Vietnam Vet
Freedom is not free, someone paid!!!
There would be no freedom without the military........
In GOD, we trust.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]