Martin,
There are a few ways to change bands. This is already on the FAQ page....
How do you change bands on the K3? Do you have to toggle through all the
bands to get to the desired one?
You can change bands in several ways:
- With the BAND UP and BAND DOWN buttons
- Using direct frequency entry; two methods:
1. Enter a frequency in MHz and then a decimal point, e.g. "7."
jumps to 7.000 MHz (40 meters)
2. Enter a frequency in kHz and then a decimal point, e.g. "1825."
jumps to 1.825 MHz (160 meters)
- Using general-purpose memories (100) for your favorite bands/modes,
including 5-character names that you assign to each memory)
- Using a computer program to control the radio
Thanks and 73
Greg
AB7R
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]]On Behalf Of Martin Sole
Sent: Tuesday, May 29, 2007 12:21 AM
To:
[hidden email]
Subject: [Elecraft] Bandchange question, K3
Hi,
After lots of studying (technobabble for drooling) I have identified a
point that might be irksome, at least to me.
I cannot see any direct band change keys. Is the only way to change
bands with the up/down slector ala some Icom's? More what about band
stacking registers?
Thanks
Martin, HS0ZED
_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com_______________________________________________
Elecraft mailing list
Post to:
[hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/subscribers.htmElecraft web page:
http://www.elecraft.com
Locked
