Best way to sell K2 S/N 5,960

[KEN-101]

Hello Folks,

I just finished a QRP K2 that I'll be putting up fro sale later. Was a friend's that he never built.

My question is this.....would it be easier to sell if I built and installed the KAT2 or sold that separately?

I did install the 160 meter board.


Thanks, Ken.....W2GIW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Jim Dunstan]

Hi,


Will the PTT line at the mic connector key the K2 when it is placed in the
CW mode ?

Thanks

Jim, VE3CI

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Jim,

Yes, indeed it will.  If you have the menu INP parameter set to HND, you
will be able to send CW with the PTT button. but if you have INP set to
PDLn, you will send a string of dots (PDLr sends dashes).  The PTT input
and the DOT input lines are one and the same inside the K2.

73,
Don W3FPR



Jim Dunstan wrote:
> Hi,
>
>
> Will the PTT line at the mic connector key the K2 when it is placed in the
> CW mode ?
>  
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html