Yes a click is a better description. It is very consistent. The
soldering is excellent on this radio. Flowed through both sides on
everything. I used good equipment and a grounded blue mat bench top. No
static issues. I will do that CAL PLL again. The VFO cal is real close
to WWV on 10mc and also matches my 3mc oven oscillator and DDS VFO also.
I'll do that & report back...hi hi...
Thanks much,
Mike
WE0H
Don Wilhelm wrote:
> Mike,
>
> If you can describe that more as a "click" rather than a "birdie", I
> can offer a solution - run CAL PLL again - be certain the 4 MHz
> oscillator is set first and the bottom cover is in place. You also
> may want to re-flow the soldering on RF Board U4 before doing the CAL
> PLL. With the repetitive frequencies involved, it sounds like more of
> a PLL problem than a birdie.
>
> 73,
> Don W3FPR
>
> Mike-WE0H wrote:
>> Anyone else notice a birdie when the display is tuned upward from
>> xx.11 to xx.12mc??? It is the transition from any megahertz dot 11 to
>> dot 12. It throws out a loud birdie every time at any MC interval.
>> Does that make sense? I am on 30 meters right now. The display shows
>> 10114.11 then I tune to 10114.12 and I hear the birdie on that
>> transition. It also happens at 10115.11 to 10115.12 and so forth on
>> up the bands.
>>
>> Mike
>> WE0H
>> K2 6698
>>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html
Locked
