Good morning all,
Skip to the last paragraph to get the question.
I operate almost exclusively on CW with a KX3 and K2 that I built in 2004.
I have the audio from two computers and both radios run to a small Xenyx
502 mixer , then to a small stereo amp and a nice pair of speakers. I
seldom use the speakers and I run a couple of pairs of corded headphones
from the mixer.
I often run afoul of the headphone cord. It gets tangled in the arm of my
chair, etc... I would love to have wireless, noise cancelling headphones.
However, this would involve putting a bluetooth (or other wireless)
transmitter on the mixer output, compatible with whichever model of
headphones I buy.
The big issue (as far as I can understand it) is Latency. The CW sidetone
must not be delayed. I have googled latency specs and found some pretty
good data for headphones. I found at least one pair of headphones that
measures 40ms latency, a number that would probably work. However, that
doesn't include the latency induced by the transmitter.
Is anyone using a transmitter/headphone combination for CW that works? If
so, please share your setup details. Thanks.
Dave, K4TO
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
