I concur, I used Romex which had 2 conductors plus a ground. Perhaps he
meant that the ground wire should be the same size as the two conductors
but I am not sure how much control you have over this using standard
cable. While adding this circuit I also ran a dedicated 120v outlet for
the radio and rotators.
John KK9A
N2TK, Tony wrote:
I do not understand the need for three wires plus ground. For a clothes
dryer outlet a neutral is required to get 110VAC from one of the phases to
the neutral. But for amps you only need both phases and a ground. The
plugs are three wire, not four.
73,
N2TK, Tony
On 7/9/2018 12:26 PM, Bob McGraw K4TAX wrote:
> I would also suggest using three - #10 with ground as the line from
> the breakers to the amp operating position.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]
Locked
