I discovered a 'classic' KNB2 package (PCB is 1999, Rev D.) on a
shelf, and I'm in the mood to build it today.
After downloading the most recent manual revision, I notice that R6
has changed from 470 ohms to 220 ohms.
My junk-box contains a 221 ohm 1% 1/4W 'metal-film' resistor ... and I
should use the new value, right?
Thanks,
Rick Evans
K2/10 #2729, Orlando, FL
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html