Building time for a KPA100

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Building time for a KPA100

Tom McCulloch
I'm giving some thought to building the KPA100 in the separate enclosure.  Can someone give me an idea on how long it would take to build?  I realize that this is very subjective, but I'd like to get a general idea, say relative to building a basic K2.

Thanks
Tom
WB2QDG
K2 1103

 -------------- Original message ----------------------
From: "Craig Rairdin" <[hidden email]>

> The KAT100 is a quick build and needs the I/O with the KPA100 for testing.
> Do the KPA100 first. Once that's done and tested the KAT100 will go quickly.
>
> Craig
> NZ0R
> K1 #1966
> K2/100 #4941
>
> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of Craig Miller
> Sent: Friday, September 30, 2005 7:04 AM
> To: [hidden email]
> Subject: [Elecraft] Build Order: KPA100 & KAT100-1 ?
>
>
> I presently have a K2 with KAT2 internal tuner. I do not have a KIO2
> installed. I've just purchased the 100 watt amp and external tuner. My
> question is which order I should build and test these two units: KAT100
> first but no way to communicate with it to test it, or KPA100 first with no
> way to use it except for a dummy load? If I build the tuner first is there a
> way to "tap in" to the K2 enough to get the required communication signals
> to check the tuner out?
>  Any suggestions from the group?
> Thanks,
> Craig K3OOL
> K2 4790, KSB2 KAT2 KDSP2
> (KAT100, KPA100)
> (Does the xyl know this??)
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
>  http://mailman.qth.net/mailman/listinfo/elecraft   
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com


_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
 http://mailman.qth.net/mailman/listinfo/elecraft   

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com