Before buying my K3S a few years ago I had never owned a pan adaptor or considered it necessary. Now I find my P3 a very useful accessory and would not want to be without it for my home station. One example: up here in Alaska at 61 degrees N, often most of the bands are “dead”. I can go into the shack and quickly scroll through the bands and see if any signals are on the band. Typically if a signal shows up on the P3, it might be workable, but if it does not show up, probably not workable. On bands like 160 meters with little activity, I can immediately see if it is even worth sitting down at the operating desk, or I may decide to watch TV, read, or go out skiing. Occasionally I dig out my microphone and operate SSB. Sometimes on a 75 meter net, I want to talk to another ham, so can see on my display that there is a (relatively) open frequency 13 KHz up, so just ask him to QSY up 13 so the net can continue on “it’s” frequency. Also I have 2 or 3 antennas on some bands, with the P3 I can quickly see which works best and also that my RX array may be better for RX than my other antennas. Also I can electronically rotate my RX array and quickly see which direction has the best S to S+N ratio, which is not always the setting for max signal. I do not need a big, or colored display. You can set the P3 off to the side and not be distracted except when you need it. I set my P3 up to cover 50 KHz of a band so can see where or if there is any action. Now if I only had a display weighing only a few ounces for my backpacking QRP rigs ! I really enjoy my K3S and have no plans to “upgrade” personally, even though budget is not an issue.
Enjoy your Elecraft rigs, I have 3 of them ! Rick KL7CW
Sent from Mail for Windows 10
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]