Elecraft

Bypassing DSP to re-set filters in K2/100

Classic

List

Threaded

2 messages Options

K8RS

Bypassing DSP to re-set filters in K2/100

Ok, I want to adjust my filters using Spectrogram!

But first, I have to bypass the DSP. And that is not working out. Either the instructions in the DSP manual are not clear or I am having a brain cramp ...or a combination of both.

How do I get to the DSP menu to bypass it (turn it off)? When I tap "Display" after I get the "CF1" screen, I get the voltage and current display. What am I not doing? Or better yet, doing wrong?

After many failures with the Spectrogram and filter settings yesterday, I read today about "bypassing" my DSP. So I am stymied!
Roger K8RS K2/100 #3478
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Don Nesbitt

Re: Bypassing DSP to re-set filters in K2/100

Tap Display>(will show something like: S1 nr nt)>Push and Hold Band + (will
show something like: S1 . 10 3.0)>Push and Hold Band + (will show dSP
On)>Tap Band - (will show dSP bYP) - you have now bypassed the DSP Unit.
>tap Display (will now show operating frequency) You are now operating as
usual but without the DSP engaged.

Make your filter adjustments as usual using Spectrogram.

When you are finished and back in the operating frequency display mode, do
the following to re-engage (turn back on) the DSP:

Tap Display (will show dSP bYP)> Tap Band + (will show something like: d1
nr nt and then will quickly change to S1 nr nt) the DSP unit is now back on.
>Tap Display (will show operating frequency) - - you are back in business!
73 es have fun -- Don N4HH
----- Original Message -----
From: "k8rs" <[hidden email]>
To: "Elecraft" <[hidden email]>
Sent: Sunday, February 26, 2006 2:48 PM
Subject: [Elecraft] Bypassing DSP to re-set filters in K2/100

Ok, I want to adjust my filters using Spectrogram!

But first, I have to bypass the DSP. And that is not working out. Either
the instructions in the DSP manual are not clear or I am having a brain
cramp ...or a combination of both.

How do I get to the DSP menu to bypass it (turn it off)? When I tap
"Display" after I get the "CF1" screen, I get the voltage and current
display. What am I not doing? Or better yet, doing wrong?

After many failures with the Spectrogram and filter settings yesterday, I
read today about "bypassing" my DSP. So I am stymied!
Roger K8RS K2/100 #3478
_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 2/24/2006

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com