Elecraft

CAL FIL

Classic

List

Threaded

4 messages Options

WB3AAL

CAL FIL

Hello,

Hope someone can help me with a problem I am having trying to set my CAL
FIL settings.

I am using the N0SS program and I have looked in my K2 manual and the one on
line. I have Processor 2.01H version and I/O Controller 1.02 version.

I basic K2 for QRP operation without 60 meters.

I can't seem to enter the new value of the CAL FIL that I want to keep. I
get a INFO 230 which is BFO is not connected to freq. counter.

I know I am missing something but I just can't place my finger on it.

When I go and set my FL1 and hit the XFIL button all 000000 come up and then
InFO 230 shows up.

Any help would be grateful, thanks in advance.

72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/

K1 - SN 01011
K2 - SN 01392

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

WB3AAL

Re: CAL FIL

Sorry I forgot to say,

I also loose the setting for the CAL FIL that I just tuned in.

72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/

K1 - SN 01011
K2 - SN 01392

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Don Brown-4

Re: CAL FIL

In reply to this post by WB3AAL

Hi

Do you have the frequency counter probe connected to the BFO test point. If
you do, does the frequency counter work when you connect it to the 4.000Mhz
oscillator on the control board. If not then you have a problem with the
frequency counter on the control board. Possibly low gain on Q9 and Q10. If
you just forgot to plug in the counter probe then that is your problem.

Don Brown

KD5NDB

----- Original Message -----
From: "Ron Polityka" <[hidden email]>
To: ".Elecraft" <[hidden email]>
Sent: Wednesday, February 22, 2006 7:12 PM
Subject: [Elecraft] CAL FIL

> Hello,
>
> Hope someone can help me with a problem I am having trying to set my CAL
> FIL settings.
>
> I am using the N0SS program and I have looked in my K2 manual and the one
> on
> line. I have Processor 2.01H version and I/O Controller 1.02 version.
>
> I basic K2 for QRP operation without 60 meters.
>
> I can't seem to enter the new value of the CAL FIL that I want to keep. I
> get a INFO 230 which is BFO is not connected to freq. counter.
>
> I know I am missing something but I just can't place my finger on it.
>
> When I go and set my FL1 and hit the XFIL button all 000000 come up and
> then
> InFO 230 shows up.
>
> Any help would be grateful, thanks in advance.
>
> 72 and Thanks,
> Ron Polityka
> WB3AAL
> www.wb3aal.com
> www.n3epa.org/
>
> K1 - SN 01011
> K2 - SN 01392
>
>
> _______________________________________________
> Elecraft mailing list
> Post to: [hidden email]
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>

_______________________________________________
Elecraft mailing list
Post to: [hidden email]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft

Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

WB3AAL

Re: CAL FIL

Hi Don,

Yes, I just seen that in the manual as your e-mail came into my system. Now
I have to locate my probe.

72 and Thanks,
Ron Polityka
WB3AAL
www.wb3aal.com
www.n3epa.org/

K1 - SN 01011
K2 - SN 01392

----- Original Message -----
From: "Don Brown" <[hidden email]>
To: ".Elecraft" <[hidden email]>; "Ron Polityka"
<[hidden email]>
Sent: Wednesday, February 22, 2006 8:38 PM
Subject: Re: [Elecraft] CAL FIL

> Hi
>
> Do you have the frequency counter probe connected to the BFO test point.
> If you do, does the frequency counter work when you connect it to the
> 4.000Mhz oscillator on the control board. If not then you have a problem
> with the frequency counter on the control board. Possibly low gain on Q9
> and Q10. If you just forgot to plug in the counter probe then that is your
> problem.
>
> Don Brown
>
> KD5NDB
>
>
>
> ----- Original Message -----
> From: "Ron Polityka" <[hidden email]>
> To: ".Elecraft" <[hidden email]>
> Sent: Wednesday, February 22, 2006 7:12 PM
> Subject: [Elecraft] CAL FIL
>
>
>> Hello,
>>
>> Hope someone can help me with a problem I am having trying to set my CAL
>> FIL settings.
>>
>> I am using the N0SS program and I have looked in my K2 manual and the one
>> on
>> line. I have Processor 2.01H version and I/O Controller 1.02 version.
>>
>> I basic K2 for QRP operation without 60 meters.
>>
>> I can't seem to enter the new value of the CAL FIL that I want to keep. I
>> get a INFO 230 which is BFO is not connected to freq. counter.
>>
>> I know I am missing something but I just can't place my finger on it.
>>
>> When I go and set my FL1 and hit the XFIL button all 000000 come up and
>> then
>> InFO 230 shows up.
>>
>> Any help would be grateful, thanks in advance.
>>
>> 72 and Thanks,
>> Ron Polityka
>> WB3AAL
>> www.wb3aal.com
>> www.n3epa.org/
>>
>> K1 - SN 01011
>> K2 - SN 01392
>>
>>
>> _______________________________________________
>> Elecraft mailing list
>> Post to: [hidden email]
>> You must be a subscriber to post to the list.
>> Subscriber Info (Addr. Change, sub, unsub etc.):
>> http://mailman.qth.net/mailman/listinfo/elecraft
>>
>> Help: http://mailman.qth.net/subscribers.htm
>> Elecraft web page: http://www.elecraft.com
>>
>