CAL PLL on K2

[Ed G-2]

Hi Folks,
     I think the answer to this is yes, but I want to verify...can I run CAL
PLL on my K2 without having to reset all the filters (CAL FIL)?  Thanks for
info.
--Ed--


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Don Wilhelm-4]

Ed,

CAL PLL will not change your filter settings.
But I must ask - why will you be running CAL PLL?  Did something happen
to change the contents of the EEPROM?  A master reset will wipe out both
the filter settings and the CAL PLL data.

If you are attempting to do dial calibration on your K2, you will also
have to store new filter data based on the new setting of the 4 MHz
reference oscillator.  See the K2 Dial Calibration article on my website
www.w3fpr.com for the whole procedure.

73,
Don W3FPR

On 8/28/2011 11:44 AM, Ed G wrote:
> Hi Folks,
>       I think the answer to this is yes, but I want to verify...can I run CAL
> PLL on my K2 without having to reset all the filters (CAL FIL)?  Thanks for
> info.
> --Ed--
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html